How To Operate The Heater - Siemens 9001155296 Installation And Operating Instructions Manual

How to operate the heater

The water must be able to flow freely out of
the outlet and overflow pipes. Do not attach an
aerator to the outlet pipe.
Do not place any objects on the appliance.
Ensure that the mains cable does not come into
contact with any of the hot parts of the appliance.
The water heater will become very hot during
use! Keep children away from the heater. The
water tank, mixer tap with outlet pipe and over-
flow pipe can all reach a temperature of 100 °C.
Fill with water
Select temperature
min.
100 °C
Switching ON
Press button.
min.
100 °C
16
en
Switching OFF
If a low temperature is selected, the device auto-
matically switches off. If the device is set at higher
temperatures, it must be switched off manually.
Turn temperature selector anti-clockwise as far
as the end stop.
Open the hot-water tap
kalt
cold
Further information
If the appliance does not switch OFF when the wa-
ter boils, the appliance continues heating until the
water has evaporated.
The overheating protection switches the heater
OFF. Rotate the temperature selector as far as
possible in an anti-clockwise direction.
After the heater has cooled down, it is ready for
use again.
The temperature at which the heater switches off
can vary, although the setting remains the same,
due to:
– internal furring,
– different volumes of water in the tank,
– using the heater again before it has cooled
down.
min.
100 °C
kalt
cold
heiß
hot