Memory Module; Removing The Memory Module - Dell NOT21991 Owner's Manual

Steps
1. Place the base cover on top of the palm-rest and keyboard assembly.
2. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly, and snap the base
cover latches into place.
3. Tighten the two captive screws and replace the six screws (M2x5) to secure the base cover to the palm-rest and keyboard
assembly.
Next steps
1. Follow the procedure in

Memory module

Removing the memory module

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, carefully pry the memory-module retention clips away from the memory module until the memory
module pops-up.
2. Slide the memory module at an angle and remove it from the memory-module slot on the system board.
3. Repeat step 1 and 2 for the second memory module, if installed.
42 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.