Table of Contents
Advertisement
2
material damage
avoid
NB!
An incorrect dosage of fabric
softeners, detergents, care products
and cleaning agents can affect the
operation of the appliance.
Follow the manufacturer's dosing
▶
recommendations.
Exceeding the maximum load
quantity affects the operation of the
device.
Observe and do not exceed the
▶
maximum load for each program.
→ "Programs", page 26
Overheating of the device can affect
the operation of the device.
Keep the ventilation opening on
▶
the device clear during use.
Ensure adequate ventilation in
▶
the room.
Light objects, such as hair and fluff,
can be sucked into the ventilation
opening of the device during
operation and affect the operation of
the device.
Keep the area clean while using
▶
the device.
Keep light objects away from the
▶
device.
Foam or foam rubber can deform or
melt when drying.
Do not dry any laundry
▶
containing foam or foam rubber.
Unsuitable cleaning agents can
damage the surfaces of the device.
Do not use harsh or abrasive
▶
cleaning agents.
Do not use cleaning agents
▶
containing strong alcohol.
Avoid material damageNL
▶ Do not use hard scouring or
washing-up sponges.
Only clean the device with water
▶
and a soft, damp cloth.
▶
In case of contact with the device,
immediately remove all detergent
residues, spray mist residues or residues.
3 Environmental protection and
savings
3.1 Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
Dispose of the individual
▶
components separately by type.
3.2 Saving energy
If you follow these instructions, your
device will use less power.
Use the device in a well-ventilated
room and keep the ventilation
opening of the device clear.
aA hindered air exchange
extends the program duration and
increases energy consumption.
Before drying, spin the laundry in
the washing machine.
aWetter laundry extends the
program duration and increases
energy consumption.
11
Advertisement
Table of Contents
