Table of Contents
Advertisement
NLSet up and connect
use the water drain hose to direct excess
condensation water directly into the
waste water.
Comments
¡Use this device with the
supplied water drain hose.
→
"Connect the water drain hose",
page 14
If you connect the water drain hose, you
do not have to empty the condensed
water container regularly.
→
"Empty the condensed water
container", page 33
¡You can make this optional
→
"Accessories", page 29 order from
the service department.
Connect water drain hose
If you do not wish to empty the
appliance's condensed water
container regularly, connect the water
drain hose.
NB!
When using the device without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
Before using the device, properly
▶
connect the condensation water
hose or the water drain hose.
Requirements
¡The device and accessories
are unpacked.
→ "Unpack the device", page 12
¡The device is on the set-up
place set up.
→ "Installation site
requirements", page 13
14
Pull the condensed water hose
1.
from the connection.
The condensation water hose is connected
to the connection at the factory.
Remark:When removing the
condensate hose, liquid may
escape from the connection.
Slide the condensed water hose
2.
onto the holder.
Advertisement
Table of Contents
