Directive Systems & Engineering DSE2325LYK Assembly Instructions

Frequency range:
Number of elements:
Boom length:
Boom diameter:
Mast diameter:
Weight: (assembled)
Connector:
Quantity Description
2 .058" x 1" drilled boom
reflector 1 (1/4" wide)
1
reflector 2 (3/8" wide)
1
1 driven element
4 directors 1-4 (1/4" wide)
7 directors 5-11
6 directors 12-17
5 directors 18-22
1 Anti-Seize Compound
2 1" Black End Cap
Anti-Seize Compound - Apply a small amount of the supplied Anti-Seize Compound to the aluminum joints and
to the threads of the U-Bolts to prevent galling.
BEFORE INSTALLING YOUR NEW ANTENNA, PLEASE BE SURE
CAUTION: While we strive to remove all burrs from all machined parts, there is always the possibility of
sharp edges. We strongly suggest checking the edges and use a fine file, or 400 grit
sandpaper, to remove any burrs that may have been left.
DSE2325LYK Rev 10/20
Directive Systems & Engineering
Haymarket, VA 20169-1628
23cm Loop Yagi Kit, Model DSE2325LYK

SPECIFICATIONS

1.27 to 1.30 GHz
25
72 inches
1 inch
2 inches max
3 pounds assembled
Type-N female

PARTS LIST

Note: All hardware is Stainless Steel unless otherwise noted.
TO READ THE ENCLOSED WARNING PAMPHLET.
2702 Rodgers Terrace
www.directivesystems.com
703-754-3876
Gain:
3 dB Beamwidth
(E plane):
F/B ratio:
Maximum Power:
Stacking distance:
Quantity Description
4-40 x 1 1/4" screw
25
25 4-40 lock nut
8-32 x 1 1/4" screw
2
8-32 x 2" screw
2
4 8-32 hex nut
4 #8 Split Lock Washer
1 Boom to Mast Bracket
1 Boom to Mast Plate
1 2" U-bolt with nuts & lock washers
1 Saddle
1 Cable assembly w/connector
1 Assembly Manual
18.5 dBi
24º
>20 dB
550 W average
19 ¼" (48.9cm) V
21 ¾" (55.25cm) H