Directive Systems & Engineering DSE2414LYRMK Quick Start Manual

24cm loop yagi kit (rear mount)

Advertisement

24cm Loop Yagi Kit (Rear Mount), Model DSE2414LYRMK
Frequency range:
Number of elements:
Boom length:
Boom diameter:
Mast diameter:
Weight: (assembled)
Connector:
Quantity
Description
1
.058" x 1" drilled boom
reflector 1 (1/4" wide)
1
reflector 2 (3/8" wide)
1
1
driven element
1
director 1 (1/4" wide)
3
directors 2-4 (1/4" wide)
3
directors 5-7
4
directors 8-11
1
Anti-Seize Compound
2
1" Black End Cap
Anti-Seize Compound - Apply a small amount of the supplied Anti-Seize Compound to the aluminum joints and
to the threads of the U-Bolts to prevent galling.
BEFORE INSTALLING YOUR NEW ANTENNA, PLEASE BE SURE
CAUTION:
While we strive to remove all burrs from all machined parts, there is always the possibility of
sharp edges. We strongly suggest checking the edges and use a fine file, or 400 grit sandpaper,
to remove any burrs that may have been left.
DSE2414LYRMK Rev 4/21
Directive Systems & Engineering
2702 Rodgers Terrace
Haymarket, VA 20169-1628

SPECIFICATIONS

1.24 to 1.27 GHz
14
36 inches
1 inch
2 inches max
3 pounds
Type-N female

PARTS LIST

Note: All hardware is Stainless Steel unless otherwise noted.
TO READ THE ENCLOSED WARNING PAMPHLET.
www.directivesystems.com
703-754-3876
Gain:
-3 dB Beamwidth
(E plane):
F/B ratio:
Maximum Power:
Quantity
Description
4-40 x 1 1/4" screw
14
14
4-40 lock nut
8-32 x 1 3/8" screw
2
2
8-32 hex nut
2
#8 Split Lock Washer
1
Boom to Mast "L" Bracket
1
2" U-bolt with nuts & lock washers
1
Saddle
1
Cable assembly w/connector
1
Assembly Manual
15 dBi
30º
>20 dB
550 W average

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSE2414LYRMK and is the answer not in the manual?

Questions and answers

Summary of Contents for Directive Systems & Engineering DSE2414LYRMK

  • Page 1 Directive Systems & Engineering 2702 Rodgers Terrace Haymarket, VA 20169-1628 www.directivesystems.com 703-754-3876 24cm Loop Yagi Kit (Rear Mount), Model DSE2414LYRMK SPECIFICATIONS Frequency range: 1.24 to 1.27 GHz Gain: 15 dBi Number of elements: -3 dB Beamwidth Boom length: 36 inches (E plane): 30º...
  • Page 2 SWR. If you want to further lower the SWR, from the rear of the DSE2414LYRMK Rev 4/21...
  • Page 3 DO NOT, UNDER ANY CIRCUMSTANCES, APPLY ANY TYPE OF SEALANT OR COATING TO THE ® DRIVEN ELEMENT, T-ARMS OR CONNECTOR ASSEMBLY, OTHER THAN KRYLON CLEAR COAT. ANY OTHER COATING WILL ADVERSELY AFFECT THE SWR AND VOID YOUR WARRANTY. DSE2414LYRMK Rev 4/21...
  • Page 4 2.75 inches high; this makes it wider than it is tall. This shape can be adjusted for best match. This antenna has been optimized for the short boom length from the original G3JVL design. Soldered Driven Element DSE2414LYRMK Rev 4/21...
  • Page 5 ANY ANTENNA THAT HAS BEEN MODIFIED WILL BE SUBJECT TO A RESTOCKING CHARGE. IF AN ANTENNA IS SO MODIFIED AS TO MAKE IT UNUSABLE, DIRECTIVE SYSTEMS RESERVES THE RIGHT TO REFUSE TO ACCEPT THE ANTENNA FOR RETURN. DSE2414LYRMK Rev 4/21...

Table of Contents