Table of Contents
Advertisement
Select OSD language
If one of the buttons is being pressed for the first time for the OSD menu, the
selection screen for the language is displayed:
► Press the
/
► Press the
MENU
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
► Press the
AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI-D/HDMI)
► Press the
INPUT
► Press the
ECO
monitor connection (VGA, DVI or HDMI).
► Press the
MENU
This setting window can also be called up when the OSD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
The message OSD locked and a progress bar appear.
► To activate the lock function, keep both buttons pressed until the progress bar is fully loaded.
The OSD menu is locked.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu
button or the
/
/
button to confirm or the
/
button for about 1 second.
/
button to call up the Input select settings window.
/
or the
INPUT
/
button to confirm or the
button and the ON/OFF switch simultaneously for several seconds.
MENU
button to select the desired language.
AUTO
/
/
button to select the desired
AUTO
/
button to cancel.
button to cancel.
Operation
21
Advertisement
Table of Contents
