Advertisement
Electronic hidden RFID lock FS
Assigning manager cards (for Personal use only)
1. Press the programming button 1 for two seconds.
The green LED starts flashing.
2. While the green LED is flashing, hold the Manager
Card to be assigned in front of the lock.
3. A beep confirms the successful operation.
4. If required, hold further Manager Cards to be
assigned in front of the lock one after the other
(max. 3).
5. As the card will/may have the same colour mark this
card to recognize later. (e.g. write "Manager card"
with permanent marker on the card and indicate
the location – "1st floor").
Information updated September 2023
Assigning User cards (for Personal mode only)
1. Hold manager card in front of the lock. The green
LED starts flashing.
2. While the green LED is flashing, hold the card to be
A Button 4
assigned centrally in front of the lock.
3. A beep confirms the successful operation.
B Button 3
4. If necessary, hold additional cards to be assigned
C Button 2
one after the other in front of the lock (Multiple User
D Button 1
cards can be assigned to the same lock, for a group
of people to use the same locker. Card limit for
E LED
1 lock - 30).
F Battery
compartment
G Hole for
fixing screws
5
Advertisement
