Table of Contents
Advertisement
11. Leave antenna model set
to 'Integrated'.
Height is the rod height.
Additional offset will not be
used here but can be used
if unit is mounted above a
prism, etc.
Click 'Accept'.
12. Select 'Yes' here.
When you prepare to start
surveying using a base-rover
configuration, it is advisable
to confirm that the Base
Radio configuration is set
current. This is indicated by
an orange check.
If it is not, you can pick the
arrow (>) to the right of the
configuration, and select
'Current'.
41
Advertisement
Table of Contents
