9. An example configuration
is shown.
The base and rover must use
the same Channel
frequency, Protocol,
Spacing, FEC setting, and
Format.
If base ID is selected, it must
be set to match in Rover
setup.
Note:
FCC licensing required for
GNSS radios. Your channel
selection should reflect
your licensed frequencies.
Click 'Next'.
10. You can adjust your
satellite cutoff angle here.
Move sliders to use
GLONASS, BEIDOU, and
GALILEO.
Adjust update frequency as
appropriate for your task.
Base and rover need to
match.
Click 'Next' when done.
40