Drainage - universalblue UCDH8002-20 Instruction Manual

20l dehumidifier
Table of Contents

Advertisement

Available languages

Available languages

DEFROST FUNCTION
The appliance has a safety system to prevent the compressor from
freezing. In this way, when low temperatures are detected in the
compressor, the display will show P1 error and the device will stop
automatically. Once the compressor warms up the appliance will
work again.

4. DRAINAGE

Manual drainage
Once the water tank is full, the indicator
will turn on and the unit
will stop working. An alarm will beep 10 times to indicate that the
tank must be emptied.
Place both hands respectively at the side of the back cover of the
unit, gently remove the water tank and open it on the right side of
the body, then empty the water. Close the tank cover, place the
handle back to its position and put the tank back in this place inside
the dehumidifier.
Warning: please empty the water tank as soon as it fills up. Before
putting the water tank back into the dehumidifier, please ensure the
floater rotates flexibly. Then use both hands to put the tank back to
its position.
Continuous drainage (optional)
Water can be drained continuously if a hose/pipe is connected to
the back of the unit. Please note that the drainage outlet diameter is
9 mm.
Make sure the hose/pipe is well adjusted to the drainage outlet.
Otherwise, water could leak out.
31

Advertisement

Table of Contents
loading

Table of Contents