universalblue UCDH8002-20 Instruction Manual page 29

• Setting a starting time (Timer on):
While the unit on, but on standby, press the 'Timer' button to set a
starting time. To select the starting time, press the 'Humidity
setting' button. With each press, time will increase by one hour,
being the minimum 24 hours and the maximum 24 hours. Once set,
the light indicator will flicker 5 times as confirmation. When the
programmed time arrives, the unit will start working.
AUTO DEHUMIDIFYING MODE
In this mode, the unit will work automatically to maintain the
humidity of the room in the programmed value. 2 cases are
contemplated:
Case 1: if the room humidity is more than 5% higher than the
programmed humidity, the unit will work to reach the programmed
humidity. The compressor will start, and the fan will be working at
the programmed speed.
Case 2: if the room humidity is more than 5% lower than the
programmed humidity, the unit will work to reach the programmed
humidity. The compressor will stop, but the fan will keep working at
the programmed speed.
Humidity is set at 50% by default. To change it, use the 'Humidity
setting' function as explained in point number 6.
To illustrate these 2 cases, we can take this value as an example:
Case 1: the humidity of the room is 55% or higher.
Case 2: the humidity of the room is 45% or lower.
29