Maintenance; Maintenance And Cleaning The Unit; Fuse Replacement - ProLights ARTNETNODE5P User Manual

ARTNETNODE
10

- 4 - MAINTENANCE

4.1 MAINTENANCE AND CLEANING THE UNIT

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts
subject to dust and grease deposits. The frequency with which the following operations are to be carried
out depends on various factors, such as the quality of the working environment (air humidity, presence of
dust, salinity, etc.). Before starting any maintenance work or cleaning of the unit, cut off power from the
main supply. Wait until the unit has cooled down. When cleaning the product, please do not use solvents
such as acetone or alcohol, since they may damage the of the unit outer finish and the printings on the
panels.
Warning: we strongly recommend internal cleaning to be carried out by qualified personnel!

4.2 FUSE REPLACEMENT

1. Disconnect this product from the power outlet.
2. Using a screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Fuse
Fig.5