Advertisement
5.
Rear handgrip
6.
Blade protection
7.
Trigger switch
8.
Safety switch
21.
EC Conformity marking
22.
Name and address of the manufacturer
23.
Acoustic output level
24.
Manufacturer's model of reference
25.
Serial number
26.
Year of manufacture
27.
Voltage and current
Do not dispose of electric
e q u i p m e n t t o g e t h e r w i t h
household waste material! In
observance of European Direc-
tive 2012/19/EC on waste
electrical and electronic equip-
ment and its implementation in
accordance with national law,
electric equipment that have reached the end of
their life must be collected separately and
returned to an environmentally compatible recy-
cling facility. If electrical appliances are disposed
of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the
foodchain, damaging your health and well-being.
For further information on the disposal of this
product, please contact your dealer or your near-
est domestic waste collection service.
SAFETY REQUIREMENTS
Your machine must be used carefully. Symbols
have therefore been placed on various parts of
the machine to remind you of the main precau-
tions to be taken. Their meaning is explained
below. You are also asked to carefully read the
safety regulations in the specific chapter of this
manual.
Replace damaged or illegible labels.
41.
Warning! Danger. Failure to use this machine
correctly can be hazardous for oneself and
others.
42.
If you are using the machine every day in
normal conditions, you can be exposed to a
noise level of 85 dB (A) or higher. Wear safe-
tyglasses and hearing protection.
43.
Do not leave the machine in the rain (or in
damp conditions).
44.
Read the instruction manual before using
the machine.
45.
At work, wear dust masks.
TECHNICAL DATA AND ACCESSORIES
[71] Voltage and current
[72] Cutting lenght
[73] Weight
[74] Cutting movements
SAFETY REGULATIONS
to be observed scrupulously
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
7
Advertisement
