Available Accessories; Unpacking And Checking Carton Contents - Craftsman 183.17253 Owner's Manual

AVAILABLE ACCESSORIES
IA WARNINGI
Use only accessories recommended for this cutting
tool. Follow instructions that accompany accessories.
Use of improper accessories may cause injury to the
operator or damage to the cutting tool.
Visit your Sears Hardware Department or see the Sears
Power andHand Tool Catalog for an assortment of
accessories recommended for use with this cutting tool:
Flex Drive
Rip Guide
Router
Circle Cutter
I/_" Curt'rag Bits
_ls" Hobby Rotary Tool Accessories
_- Cutters
;" Polishers
_. Sanders
>, Gdnders
Most ¼" Shank Router Bits
IA WARNINGI
Use only accessories designed for this cutting tool to
avoid severe injury or tool damage.
Do not use any accessory unless you have
completely read the instructions or Owner's Manual
for that accessory.
;f-'1£.4I[o]_EaZo]_ III _ _| I_
UNPACKING AND CHECKING CARTON CONTENTS
[A WARNING I
ff any pert is missing or dameged, do not plug the
cutting tool into the power source until the missing
or damaged part is replaced end assembly is
complete.
Carefully unpack the cutting tool and all its components,
Compare against the "Cutting Tool Components" chart
below.
NOTE: See Page 7 for illustration of components,
(_, WARNING I
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the cutting tool.
cuTrlNG TOOL COMPONENTS
KEY r DESCRIP'flON I QTY
Cutting Tool Box
A Cutting Tool 1
B Collet Wrench 1
C Collet Wrench Holder 1
D Owner's Manual 1
Accessory Box
E Precision Handle with Sole Plate 1
F Freehand Sole Plate Attachment 1
G 1/8" Collet Sleeve 1
H 1/4" Collet Sleeve 1
I Lateral Styte Drywall Cutter 1
J Wood / PlasUc / Fiberglass Cutter 1
NOTE: The two most commonly used cutters are
included with this tool (items I & J). It is Important
that you use the co_ cutter to ensure the most
efficient cutting action.
• Use cutter =1"with the finer spiral for cutting
drywall
• Use the general purpose cutter "J" wIth the
coarser spiral for cutting materials such as wood,
plastic and fiberglass.
6