Grease Filter Indication; Carbon Filter Indication - Pelgrim ISWA0960WIT Instructions For Use Manual

OPERATION

Grease filter indication

The indicator lights on the buttons 2 and 3 are lit continuously after the extractor hood has been
in use for 100 hours. This is to indicate that the grease filter needs to be cleaned.
Reset of the grease filter indication
The cooker hood is switched off.
1. Press and hold speed button 3 for three seconds
▷ All indicator lights will flash three times to confirm that the setting has been reset.

Carbon filter indication

The indicator lights on the buttons 2 and 3 will flashs after 200 hours use of the cooker hood
(when the carbon filter indication has been activated), to warn that the carbon filter must be
replaced.
Activate/deactivate the carbon filter indication
1. Switch on the lighting.
2. Activate the carbon filter indication by pressing and holding the on/off button for three
seconds.
▷ All indicator lights will flash two times to confirm that the setting has been activated.
3. Deactivate the carbon filter indication by pressing and holding the on/off button for three
seconds.
▷ All indicator lights will flash one time to confirm that the setting has been deactivated.
Reset of the carbon filter indication
The cooker hood is switched off.
1. Press and hold speed button 3 for three seconds
All indicator lights will flash three times to confirm that the setting has been reset.
▷
EN 7