Switching The Lighting On And Off; Switching On The Clean Air Function; Switching On The Timer Function - Pelgrim ISWA0960WIT Instructions For Use Manual

OPERATION

Switching the lighting on and off

1. Shortly press and release the lighting button.
The lighting switches on.
▷
2. To turn off the lighting, shortly press and release the lighting button again.
When a connected hob is switched on, the lighting of the cooker hood always switches
on automatically. You can continuously adjust the brightness of the hood via the hob.
When switching off a connected hob, the lighting remains on. Manually switch off the
lighting with the lighting key on your AutoAir hob, with your remote control or via your
hood.

Switching on the Clean Air function

1. Press and hold speed button 2 for three seconds.
▷ The Clean air function is activated.
▷ The cooker hood will be switched on for 10 minutes every hour for the next 24 hours.
The indicator light on the button flashes during extraction.
▷
The cooker hood switches off after 10 minutes, and the Indicator light continues to flash.
▷
▷ The Clean Air function cannot be used when the intensive setting has been selected.

Switching on the timer function

1. Select the desired extraction setting by pressing the corresponding button.
2. Press and hold the lighting button for three seconds.
▷ The timer is switched on.
The indicator light on the speed button flashes during extraction.
▷
The cooker hood stays switched on at the set speed for 30 minutes. The cooker hood
▷
then switches off.
The timer function cannot be used when the intensive setting or the Clean Air function
▷
has been selected.
EN 6