Beko WITV 8712 X0W User Manual page 26

2. Some of our products have emergency draining hose and some does not have. Follow the steps
below to discharge the water.
Discharging the water when the product does not have an emergency draining hose:
a. Place a large container in front of the filter to catch water from the filter.
b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the
container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any
spilled water.
c. When the water inside the machine is finished, take out the filter completely by turning it.
3. Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.
4. Install the filter.
5. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one
piece, seat the tabs in the lower part into their places first, and then press the upper part to close.
26 / EN
Washing Machine / User's Manual