Table of Contents
Advertisement
4.4 Maintenance and cleaning
Service life of the product extends and frequently faced problems decrease if cleaned at regular
intervals.
4.4.1 Cleaning the detergent drawer
Remove any powder residue buildup in the drawer. To do this;
a. You can remove the detergent drawer by pulling it towards yourself strongly.
C
If more than a normal amount of softener and liquid detergent mixture starts to remain in the softener
compartment, the siphon must be cleaned.
b. Wash the drawer and the siphon with plenty of lukewarm water in a washbasin. Wear protective
gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning.
c. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location.
4.4.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see Operating the product - Programmes.
C
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
C
Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using
cleaning agents for stainless steel. Never use steel wool or wire wool.
A
WARNING:
24 / EN
Never use sponge or scrub materials. These will damage the painted and plastic surfaces.
Washing Machine / User's Manual
Advertisement
Table of Contents
