Advertisement
CS3.7
A revolutionary breakthrough in driver
design that advances the sonic state-of-the art
awaits your ears with the CS3.7. Its entirely
original midrange driver provides exquisitely
pure sound reproduction without a trace
of audible resonances or cavity diffraction
distortions. The all-new 1-inch high-output
tweeter and low distortion 10-inch woofer
are combined with an advanced cabinet
incorporating an aluminum cap and baffle,
and curved 15-layer cabinet walls for
extreme rigidity. The result is unprecedented
purity, naturalness, and realistic sound.
32 Hz–35 kHz (-3 dB)
Bandwidth:
33 Hz–26 kHz ±2 dB
Amplitude Response:
90 dB @ 2.8 V-1m
Sensitivity:
4 ohms (2.8 ohms min.)
Impedance:
100-600 watts
Recommended Power:
12.5 w x 21 d x 45 h inches
91 pounds
Patented, revolutionary technology for adding incredible bass extension to your
THIEL's revolutionary SmartSub
distortion problems that traditionally plague subwoofers. THIEL's unique, patented bass solutions deliver extraordinarily
seamless, clean, and deep low-frequency reproduction for the most realistic home theater or music experience possible. THIEL's
SS1, SS2, SS3, and SS4 subwoofer systems use all-THIEL designed high output, low distortion drivers to provide
exceptionally deep, uniform, and dynamic bass down to 10 Hz for any size room. Each is easily adjusted
to eliminate wall interaction problems for any room placement without the use of complicated
measurements or equipment using THIEL's patented room correction technology. The result
is perfectly balanced bass regardless of placement. In addition, unique sub amplifier circuitry
eliminates compression distortion to greatly improve dynamics and tonal response. The SS2,
SS3, and SS4 are powered by an internal 1000 watt high-efficiency switching mode amplifier,
and 500 watts for the SS1.
SS1
Driver Configuration:
1 x 10" woofers
Size: 11" W x 15.5" D x 20" H
Weight: 55 pounds
Acoustic Output:
up to 99 dB @ 20Hz, 106 dB @ 30Hz
Amplifier Power: 500 watts, RMS
Floor-Standing
conventional speaker designs, the
CS2.4 offers a new perspective in
loudspeaker performance for both
music and movies. The CS2.4 utilizes
a unique, innovative mid-tweeter array
that provides very high-quality 3-way
performance while requiring only a
2-way speaker's electronic crossover
and driver magnet systems. This design
technique provides a much higher level
of performance than other speakers in
Amplitude Response:
Subwoofers
home theater or music system!
®
Technology effectively eliminates the room interaction, main speaker integration, and
SS2
Driver Configuration:
2 x 10" woofers
Size: 11" W x 20" D x 23.5" H
Weight: 108 pounds
Acoustic Output:
up to 105 dB @ 20Hz, 112 dB @ 30Hz
Amplifier Power: 1000 watts, RMS
CS2.4
An innovative departure from
its price range.
33 Hz–37 kHz (-3 dB)
Bandwidth:
36 Hz–25 kHz ±2 dB
87 dB @ 2.8 V-1m
Sensitivity:
Impedance:
4 ohms (3 ohms min.)
100-400 watts
Recommended Power:
11 w x 14 d x 41.5 h inches
70 pounds
SS3
Driver Configuration:
2 x 12" woofers
Size: 16" W x 20.75" D x 34" H
Weight: 167 pounds
Acoustic Output:
up to 109 dB @ 20Hz, 116 dB @ 30Hz
Amplifier Power: 1000 watts, RMS
CS1.6
The look is sleek and unassuming.
The sound is totally exhilarating. The
CS1.6 establishes a new benchmark
in loudspeaker performance that
substantially reduces the entry price
into high-end sound. The 2-way
CS1.6 incorporates an extremely wide
bandwidth woofer that greatly improves
performance in a small, floor-standing
loudspeaker, delivering a much purer and
more open upper midrange coupled with
a smoother high frequency performance.
Its high 90 dB efficiency works well with
lower power amplifiers
48 Hz–20 kHz (-3 dB)
Bandwidth:
52 Hz–20 kHz ±2 dB
Amplitude Response:
90 dB @ 2.8 V-1m
Sensitivity:
4 ohms (3 ohms min.)
Impedance:
50-300 watts
Recommended Power:
9 w x 11.5 d x 35.5 h inches
38 pounds
SS4
Driver Configuration:
2 x 15" woofers
Size: 19" W x 25" D x 51" H
Weight: 290 pounds
Acoustic Output:
up to 113dB @ 20Hz, 120dB @ 30Hz
Amplifier Power: 1000 watts, RMS
Advertisement
