Hisense RB440N4BCE User's Operation Manual page 42

13
part ② by screws ① .Before fix part
pass connector ③ through hinge
refer to step 3. (Please hold upper
door by hand when installing)
① Special flange screws
② Upper hinge
MODEL WITHOUT DISPLAY
① Special flange screws
② Upper hinge
③ Electrical connector
MODEL WITH DISPLAY
Connect electrical connector
16.
as shown in the picture, then fix part
② ③
by screw refer to step 2.
② ,
① electrical connector
②
② upper hinge cover
③ self tapping screw -
MODEL WITH DISPLAY
17. Open the upper door, mount door
racks and then close it.
Note:
If your appliance has handle,you
have to reverse handle by follow
instructions below.
Remove the upper door and place it
on a smooth surface with its panel
upwards. Lever part
then loose screws
the picture. Change handle
right side, then install screws
part ① and part
①
① and part ④ ,
② , as shown in
③ to the
② ,
④ in turn.
① Handle covers
② Special screws
③ Handle
④ Screw hole cover