Making A Call; Receiving A Call - LOGICOM VR BOT 552 Quick Start Manual

Table of Contents

Advertisement

CAUTION : Forgetting your screen lock password, PIN code or pattern permanently blocks
your Smartphone
If this is forgotten or lost, the product warranty will not cover such an oversight. Even a "reset"
cannot solve the problem. As a precaution, take a note of your password or pattern.

4. Making a call

NOTE: It is impossible to make or receive a call on the two SIM cards at the same time.
For example, if you are on a call on the SIM 1 line, those trying to contact you on SIM 2 will automatically be diverted
to voicemail.
Tap the
icon on the main menu or the home screen to dial the number of your choice.
Tap the operators icon to call with SIM 1 or SIM 2.
Press the +/- buttons to adjust the call volume.
When you want to end a call, press the

5. Receiving a call

When a call is received, slide your finger over the
When you want to end a call, press the
6. Enable / Disable the Wi-Fi connection
NOTE: To limit your exposure to electromagnetic fields we recommend you disable Wi-Fi when not in use.
WAR NING: Your device has WI-FI function on the non-harmonized bandwidth 5Ghz. This function can be used in
all countries of the European Union without restriction. For outdoor use, be sure to not connect to a WI-FI
network using the 5150 – 5350 Mhz bandwidth.
In the settings, press
on the network of your choice to activate it and connect to it. You can also activate this function from the
notifications panel. The icon is displayed in the system tray when you are connected to a wireless internet network
or when wireless internet networks are detected by the device.
NOTE: Most Wi-Fi networks are locked with a password (WEP or WPA2 PSK key). To connect to a locked Wi-
Fi network, click on it and enter the password for your network in the dialogue box which is displayed on
the screen.
The WEP or WPA2 PSK key for a Wi-Fi network is generally noted on a label located on the back of your
internet modem.
NOTE: Restart your Smartphone if necessary.
PASSWORD: _________________
to activate the Wi-Fi. The device automatically searches the available Wi-Fi networks. Click
icon
.
icon.
icon.
Press
Once the Wi- Fi enabled, the
appears in your notification bar
to turn on / off Wi-Fi
icon
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VR BOT 552 and is the answer not in the manual?

Questions and answers

Table of Contents