Hob-Based Hood Control - NEFF I16RPS8S5 User Manual And Assembly Instructions

To save the setting, press and hold ⁠ and ⁠
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡ After the appliance has been switched off, LED 1
flashes in the LED display for the grease filter satura-
tion display and/or LED 2 flashes for the saturation
indicator for the odour filter.
¡ A repeated signal tone sounds.
Press ⁠ .
▶
a The saturation indicator is reset.
Setting the saturation indicator
The saturation indicator must be adjusted depending
on the filter used.
Requirement: The appliance is switched off.
Press and hold ⁠ and ⁠ for approx. three seconds.
1.
To set circulating-air mode (non-regenerable fil-
‒
ter), press ⁠ /⁠ until LED 2 lights up in the LED
display.
To set circulating-air mode (non-regenerable fil-
‒
ter), press ⁠ /⁠ until LED 3 lights up in the LED
display.
To convert the electronic control back to opera-
‒
tion without the air recirculation filter, press ⁠ /⁠
until LED 1 lights up on the LED display.
To save the setting, press and hold ⁠ and ⁠ for ap-
2.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
To cancel the setting, press ⁠ .
a A signal tone sounds as soon as the selected set-
ting is saved.
Switching on the lighting
Press ⁠ to switch on the lighting.
▶
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Switching off the lighting
Switch off the lighting with ⁠ .
▶
Setting the brightness
Press and hold ⁠ or ⁠ .
▶
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Switching on the button tone
The button tones can be switched on.
for ap- Requirement: The appliance is switched off.
Press and hold ⁠ and ⁠ for approx. three seconds.
1.
a In the LED display, the LED for the setting that is
currently selected lights up.
Press ⁠ or ⁠ until LED 1 lights up in the LED dis-
2.
play.
To cancel the setting, press ⁠ .
To save the setting, press and hold ⁠ and ⁠
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
Switching the button tone off
The button tones can be switched off.
Note: Signal tones for the appliance are always
switched on and cannot be switched off.
Requirement: The appliance is switched off.
Press and hold ⁠ and ⁠ for approx. three seconds.
1.
a In the LED display, the LED for the setting that is
currently selected lights up.
Press ⁠ or ⁠ until LED 2 lights up in the LED dis-
2.
play.
To cancel the setting, press ⁠ .
To save the setting, press and hold ⁠ and ⁠
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.

Hob-based hood control

You can connect your appliance to a suitable hob and,
in this way, control the functions of your appliance via
the hob.
You have the following options for connecting the
appliances with each other:
¡ Connecting the appliance via the Home Connect
app. If both appliances are Home Connect-compat-
ible, they can be connected using the Home Con-
nect app. Follow the instructions in the app.
¡ Connecting appliances directly with each other.
¡ Connecting appliances via the Wi-Fi home network.
Note: Please note the safety precautions in the instruc-
tion manual for your appliance and ensure that they are
also observed when operating the appliance via the
hob-based hood control.
Tip: Operating your appliance always takes priority. It is
not possible to use the hood controls on the hob dur-
ing this time.
Hob-based hood control en
for ap-
for ap-
7