ILive ISB143 - Wireless Speaker User's Guide

ILive ISB143 - Wireless Speaker User's Guide

Advertisement

ILive ISB143 - Wireless Speaker User's Guide

Features

  • Bluetooth wireless 5.3: range approximately 33ft.
  • Bluetooth TWS – Pair with another ISB143 speaker
  • Micro SD card port
  • Aux In
  • Digital volume control
  • Voice prompts
  • Built-in rechargeable battery: approximately 4 hrs of playtime at 50% volume
  • USB-C port for battery recharge

Includes

  • User's Guide
  • USB-C to USB charging cable

Controls

Controls Overview

  1. Power/Play/Pair: Press and hold for 3 seconds to power on your speaker. Press and hold again to power off your speaker. When on, press once to play or pause music tracks. Press twice to connect or disconnect from Bluetooth.
  2. Mode: Press to change source modes to Bluetooth, AUX, or MicroSD. Press and hold to activate TWS Mode.
  3. Lights: Press to cycle through LED light modes. Press twice to turn lights on/off. Press and hold to turn voice prompts on/off.
  4. Vol +/Next: Press to increase volume level. Press and hold to play the next track.
  5. Vol -/Previous: Press to decrease volume level. Press and hold to play the previous track.

Inputs

Inputs

Voice Prompts

Press and hold the Lights button for 5 seconds to turn voice prompts on/off.

Charging the Battery

To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and a powered-on computer or USB power adapter (not included) and standard power outlet. Charging time is approximately 180 minutes.
When the battery is low, a voice will announce "Low battery," then the unit will automatically power OFF. While the unit is charging, the Indicator LED will display a solid red light. When the battery is fully charged, the light will turn off.
Charging the Battery

Pairing & Playing Bluetooth Audio

  1. When first powered on, the speaker defaults to Bluetooth Mode and is ready to pair automatically. When pairing, remain within 3 feet of the Bluetooth device.
  2. Using the controls on your Bluetooth device, select ISB143 in the Bluetooth Settings to pair. If need be, refer to the user's manual for your specific device for more information.
  3. When successfully paired, a voice will announce "Bluetooth connected." Your Bluetooth device will now be heard through the speaker.
  4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
  5. After initial pairing, the speaker will automatically connect to the last Bluetooth device used whenever it is in Bluetooth Mode.

Note: To disconnect a device, press the Power button twice. The speaker will re-enter pairing mode and can be paired with a different device using the steps above.

Bluetooth TWS

  1. When powered on, press and hold the Mode button on one of your speakers. This speaker will act as the host and will begin searching for another powered-on ISB143 speaker. The speakers will connect automatically.
  2. You can now connect the paired speakers to a Bluetooth device using the standard set up steps.
  3. The two speakers will automatically reconnect the next time they are both on
  4. Press and hold the Mode button on either speaker to disconnect the speakers and exit TWS mode.

Micro SD

Micro SD

  1. Load a Micro SD memory card into the appropriate media port.
  2. The speaker will automatically switch to SD mode.
  3. Use the controls on the speaker to select and play audio from the connected drive.

ADDITIONAL WARNINGS


  • To prevent fire or shock hazards, do not expose this unit to rain or moisture.

  • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
  • Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.


This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www. P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.

Contact Information
Website:
www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215

Specifications are subject to change without notice.
Copyright © 2023 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ILive ISB143 - Wireless Speaker User's Guide

Advertisement

Need Assistance?

Do you have a question about the ISB143 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents