ILive ISB13 - Orb Wireless Speaker User's Guide

Table of Contents

Contents

1 Features
2 Includes
3 Controls
4 Inputs
5 Charging the Battery
6 Pairing & Playing Bluetooth Audio
7 Notes on Bluetooth
8 TF/Micro SD/USB
9 Contact Information
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Features

Bluetooth wireless 5.0: range approximately 60 ft.
MicroSD card port
Digital volume control
LED glow ring
Built-in rechargeable battery: approximately 3 hrs of playtime at 50% volume
Micro-USB port for battery recharge

Includes

User's Guide
Micro-USB to USB charging cable

Controls

Mode: Press to change source modes to Bluetooth, USB, or MicroSD/TF.
Vol - / Previous: Press to decrease volume level. Press and hold to play the previous track.
Lights: Press repeatedly to cycle through LED light settings. Press and hold for 5 seconds to turn Voice Prompts on/off.
Play/Pair: Press to play or pause music tracks. Press and hold for 3 seconds to disconnect Bluetooth device and enter pairing mode.
Volume+/Next: Press to increase volume level. Press and hold to play the next track.

Inputs

USB Port
TF/MicroSD Slot
Power on/off
LED Indicator
DC In Port

Charging the Battery

To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and a powered-on computer or UL certified USB power adaptor (not included) and standard power outlet. Charging time is approximately 120 minutes.

When the battery is low, a voice will announce "Low battery," then the unit will power off. While the battery is charging, the LED Indicator will turn a solid red. After the battery is fully charged, the LED Indicator will turn off.

Pairing & Playing Bluetooth Audio

When powered on, the speaker will enter Bluetooth Mode automatically. If you are playing from a different source, press the Mode button to select Bluetooth Mode.
Using the Bluetooth setting on your device, search for new devices and select ISB13.
Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth devices.
When successfully paired, a voice prompt will announce the connection.
Use the controls on the connected device to select and begin playing audio. Use the controls on the speaker or the connected device to play, pause, and adjust volume.

warning Note: If your device becomes unpaired or it is unable to connect, press and hold the Play button for 3 seconds to enter pairing mode. A voice prompt will announce "Bluetooth is connecting" start from step two to connect to your device.

Notes on Bluetooth

The speaker will automatically connect to the last paired device when powering on.
The speaker can only pair with one Bluetooth device at a time.
To disconnect from one device and connect to another, press and hold the Play button for 3 seconds to enter pairing mode.

TF/Micro SD/USB

Load a TF, MicroSD memory card, or USB drive into the appropriate media port.
The speaker will automatically switch to SD mode or USB mode.
Use the controls on the speaker to select and play audio from the connected drive.