ILive Portable Wireless Speaker ISB110B Manual

Features

• Bluetooth 5.0
• Built-in microphone for hands free speakerphone
• Voice prompts announce speaker functions
• USB & Micro-SD card reader: supports MP3 files
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable battery
• Battery life: approx. 24 hrs at 50% volume

Includes

• USB charging cable
• User's guide

Overview & Controls

M (Source)

• Press to switch Bluetooth mode. You can switch to Micro-SD or USB if connected.
  Press and hold for 5 seconds to turn voice prompts ON/OFF.

-/+ (Volume)

• Press to adjust volume.
• Press and hold to skip tracks.

Pair/Play/Pause/Speakerphone

• Press to play, pause or answer/end a call.
• Press and hold for manual Bluetooth pairing, (see "Notes on Bluetooth" section).

Battery Power

• Charge fully before use. The charge time is approximately 3.5 hours.
• When the unit is charging, the LED Charging Indicator will display a solid red light. When charging is complete, the indicator will turn off.
• Using a Micro-USB to USB cable (included), connect the DC power input on the speaker to the USB port of a powered on computer or USB power adaptor (not included) to charge the speaker.

Pairing Bluetooth & Playing Audio

Note: This model features automatic Bluetooth pairing.

1. Power on the speaker, a voice will announce "Bluetooth," when the unit is ready to pair. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select ISB110 in the Bluetooth Settings to pair. A voice will announce "Bluetooth is connected," when the speaker is successfully paired to your device. If need be, refer to the user's manual for your specific device for more information.
3. Use the controls on the connected Bluetooth device to select and begin playing audio. Use the controls on the device or the speaker to play, pause, skip tracks or answer an incoming call.

Notes on Bluetooth

• If the Bluetooth device has not successfully connected to the speaker, press and hold the Play button until "Bluetooth is connecting," is heard, then repeat steps 2 and 3 from the previous section.
• The speaker can remember multiple Bluetooth devices and will always try to reconnect to the last device used. To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select ISB110.

USB/Memory Card Play

To listen to music via Micro-SD memory card or USB drive, insert the Micro-SD card into the memory card slot, or insert the USB drive into the USB port. The speaker will automatically detect the input and begin playing audio. Use the speaker controls to play, pause, skip tracks, and adjust the volume.