Electrolux ZUNN18ES1 User Manual page 10

It is possible to change predefined sound of
buttons by pressing together Mode and
4.1 Display
A
F
4.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature indicators
show the set default temperature.
To select a different set temperature refer to
"Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .
4.3 Switching off
1. Press the appliance ON/OFF for 3
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
4.4 Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulators.
Recommended set temperature is:
• -18°C for the freezer
The temperature range may vary between
-15°C and -24°C for freezer.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set temperature
remains stored.
10 ENGLISH
B C
E D
temperature colder button for a few seconds.
Change is reversible.
A. Timer indicator
B. FastFreeze function
C. Temperature indicator
D. Alarm indicator
E. ChildLock function
F. DrinksChill function
4.5 FastFreeze function
The FastFreeze function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete pre-
freezing.
1. To activate this function press the Mode
button until the corresponding icon
appears.
The FastFreeze indicator flashes.
2. Press the OK button to confirm.
The FastFreeze indicator is shown.
This function stops automatically after 52
hours.
You can deactivate the FastFreeze function
before its automatic end by repeating the
procedure until the FastFreeze indicator turns
off or by selecting a different set temperature.
4.6 ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat
the procedure until the ChildLock indicator
turns off.