Table of Contents
Advertisement
Setting the water hardness
Select the water hardness level in
your area and confirm with OK.
AutoDos (AutoDos)
AutoDos automatically adjusts the
amount of detergent to the selected
program. In the Auto program, the
quantity is adjusted depending on the
degree of soiling of the dishware.
If you want to extend the service life of
the PowerDisk, you can reduce the dis-
pensing quantity. The program's clean-
ing performance may decrease as a re-
sult.
If you want to improve the cleaning per-
formance, you can increase the dis-
pensing quantity. This reduces the ser-
vice life of the PowerDisk.
Setting the Dosage amount
For best results, you can adjust the dis-
pensing quantity of the PowerDisk.
Select the
Dosage amount
tion and confirm with OK.
Select the setting you want and con-
firm with OK.
Rinse Aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.
menu op-
Settings
35
Advertisement
Table of Contents
