Advertisement
10 - MENU ITEMS AND FUNCTION
o - System configuration
This function allows you to set the type of hydraulic system that the product must manage.
To change the configuration of the system, proceed as follows:
•
Press the "menu" key.
•
Use the arrow keys to scroll through and select "Settings"
•
Press "menu" to confirm.
•
Use the arrow keys to scroll through and select ''System configuration''
•
Press "menu" to confirm.
•
Use the + - keys to modify the configuration between 01 and 05.
•
Press "menu" to confirm and "esc" to exit.
p - Season
In configurations 2 and 3, enabling the ''summer'' function disables deviation of the 3-way valve towards the heating system to prevent
the radiators from heating up, and so the flow is always towards the domestic hot water (DHW).
Selecting the "summer" option automatically enables the auto-eco function (cannot be deactivated). The room temperature probe/
external thermostat are ignored.
Modify the function as follows:
•
Press the "menu" key.
•
Use the arrow keys to scroll through and select "Settings"
•
Press "menu" to confirm.
•
Use the arrow keys to scroll through and select ''Season''
•
Press "menu" to confirm.
•
Use the + - keys to select "Summer" or "Winter".
•
Press "menu" to confirm and "esc" to exit.
q - Technical menu
To access the technical menu you must contact the service centre as it requires a password.
Access the "technical menu" as follows:
•
Press the "menu" key.
•
Use the arrow keys to scroll through and select "Settings"
•
Press "menu" to confirm.
•
Use the arrow keys to scroll through and select ''Technical menu''
•
Press "menu" to confirm.
•
With the + - keys, select "Product Type", "Service Hours", "Parameters", "DHW Parameters", "Counter memories", "Enable fan", "Puffer
menu", "Adaptive Parameters" and "Max P1 Time".
•
Press ''menu'' to confirm and '' e sc'' to exit.
Technical Dept. - All rights reserved - Reproduction prohibited
15 15
Advertisement
