Advertisement
10 - MENU ITEMS AND FUNCTION
c - Load feed screw
This is for filling the pellet loading system. This can be enabled only when the boiler is off. A 180" countdown appears. The feed screw stops
automatically at the end of the countdown and the menu closes.
To select "Load feed screw" (only with boiler off-OFF) proceed as follows:
•
Press the "menu" key.
•
Use the arrow keys to scroll through and select "Settings"
•
Press "menu" to confirm.
•
Scroll with the arrows and select "Load feed screw".
•
Press "menu" to confirm.
•
With the + - keys, select "Enable".
•
Press "menu" to confirm and "esc" to exit.
d - Tones
Allows you to enable or disable the buzzer when pressing the buttons.
This function is disabled by default. To enable it proceed as follows:
•
Press the "menu" key.
•
Use the arrow keys to scroll through and select "Settings"
•
Press "menu" to confirm.
•
Use the arrow keys to scroll through and select ''Tones''
•
Press "menu" to confirm.
•
Use the + - keys to select "On".
e - External thermostat
EXTERNAL THERMOSTAT (not included with the boiler, it must be provided by the user)
The temperature of the boiler can also be controlled by an external thermostat in the room. It should be positioned centrally in the room
where the boiler is installed. It provides a closer match between the heating temperature requested of the boiler and the actual room
temperature it provides.
Connect the wires of the external thermostat to points 1-2 of the terminal block on the boiler. The external thermostat disables the room
probe.
Once the thermostat has been connected it needs to be enabled.
To do this, proceed as follows:
•
Press the "menu" key.
•
Scroll with the arrows to "Settings".
•
Press "menu" to select.
•
Now use the arrows to scroll to "External thermostat".
•
Press "menu" to select.
•
Press the - + keys.
•
Select "On" to activate the external thermostat.
•
Press the "menu" key to confirm.
•
Press the "esc" key to exit.
f - Auto-Eco activation
To select the Auto-Eco function, proceed as follows:
•
Press the "menu" key.
•
Use the arrow keys to scroll through and select "Settings"
•
Press "menu" to confirm.
•
Scroll with the arrows and select "Auto-Eco".
•
Press "menu" to confirm.
Technical Dept. - All rights reserved - Reproduction prohibited
11 11
Advertisement
