Advertisement
FOCUS
1
2.
Turn on the projector by pressing the POWER ON button (reference 2) on the remote control or the
POWER ON/OFF button (reference 3) on the control panel.
The status LED will flash orange. The startup screen will display and the status LED will turn to solid green
(reference 4).
Note: The first time that the projector starts up you have to accept the EULA statements to
continue using the projector. Follow the instructions on the screen.
2
3.
Turn on your source input. The projector detects the source you selected and displays the image.
Note: If you connect multiple input sources at the same time, press the Input key on the control
panel or on the remote control to switch inputs.
WARNING: Do not look directly into the lens when the projector is on. The strong light may cause
permanent eye damage.
How to power off the projector
1.
Press the Power Off button (reference 2) on the remote control or the Power On/Off button (reference 3)
on the control panel.
A confirmation request will be prompted on the screen.
2.
Press the same button again to confirm.
Note: If not confirmed after five seconds, the confirmation request will disappear and the projector
will remain on.
CAUTION: Don't power on the projector again immediately after entering standby mode.
CAUTION: Don't switch off or disconnect the projector from the power net until the cooling down
cycle is completed.
3
ZOOM
- 4 -
4
FOCUS
Advertisement
