battery kit
3-
Step 1: Remove adhesive tapes.
Tapes
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells as below drawing.
battery kit
4-
Step 1: Remove adhesive tapes.
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells.
Step 2: Connect all battery terminals by
following below drawing.
Step 4: Cover the other side of plastic shell as
below drawing.
Step 2: Connect all battery terminals by
following below drawing.
Tape s
Step 4: Cover the other side of plastic shell as in
below drawing.
16