ViewSonic IFP6552-2F User Manual page 133

NOTE:
1. Behavior at Lock Modes
Lock Mode
Button Lock
MENU Lock
POWER Lock
Remote control
disable
2. Wake-on-LAN by MAC address as alternative for SET Power on
(Length=126 Bytes)
6 Bytes 6 Bytes (#1) 6 Bytes (#2)
0xFF FF ... FF MAC address MAC address
1. Lock all buttons on the front panel and RCU, except for "Power"
2. All the SET functions should be workable via RS-232, even the ones
with according hot key in RCU like Mute,...etc.
1. Lock "MENU' key of front panel and RCU
2. The Factory and Hospitality modes should not be blocked for the
model using MENU-combined key to enter these two modes.
Alternative approach will be indicated separately if any limitation by
model.
1. Lock "POWER" key on the front and RCU.
2. The SET_POWER on/off should be workable via RS-232, but does not
mean the POWER lock will be released under this case.
3. Can not be unlocked by reset in OSD setting
4. Will auto AC power-on in power-lock
5. Under power-lock, the set will not enter power saving when no PC
signal and neither not turn off when no other video signals after 15
minutes.
Lock the RCU keys, but keep the front panel buttons workable.
Behavior
... 6 Bytes (#16)
... MAC address
133
24 Bytes
0x00 00 ... 00