Parts Description - Makita XCU12 Instruction Manual

CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.

PARTS DESCRIPTION

12
Fig.2
1 Front handle
4 Guide bar
7 Sprocket cover
10 Switch trigger
Tips for maintaining maximum
battery life
1.
2.
3.
4.
5.
1
5
11
10
2 Safety cover
5 Oil tank cap
8 Lock-off lever
11 Lever
7 ENGLISH
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
When not using the battery cartridge, remove
it from the tool or the charger.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
2
3
4
3 Saw chain
6 Guide bar cover
9 Rear handle
12 Battery cartridge
6
7
8
9