Table of Contents
Advertisement
6. Remove the
WLAN
7. Remove the
SSD
8. Remove the
hard drive assembly
9. Remove the
system fan
10. Remove the
heatsink
11. Remove the
display assembly
12. Remove the
power button board
13. Remove the
system board
Steps
1. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [1].
2. Peel the adhesive tape off the power adapter port cable [2].
3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [3].
Installing the power adapter port
Steps
1. Place the power adapter port into the slot on the palmrest and keyboard assembly [1].
2. Replace the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [2].
3. Affix the power adapter port cable to the palmrest and keyboard assembly [3].
Removing and installing components
65
Advertisement
Table of Contents
