Tenda W311R+ User Manual page 39

11N Wireless Broadband Router
one second (Press the button for about one second
and WPS indicator will be blinking for 2 minutes,
which means the WPS is enabled. During the
blinking time, you can enable another device to
implement the WPS/PBC negotiation between
them. Two minutes later, the WPS indicator will be
off, which means the WPS connection is completed.
If more clients are added, repeat the above steps.
At present, the WPS supports up to 32 clients
access.)
PIN: If this option is enabled, you need to enter a
wireless client's PIN code in the field and keep the
same code in the WPS client.
WPS Summary: Show the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
WPS Current Status: Idle means WPS in idle
state. Start MSC process means the process has
been started and waits for being connected.
Configured means the negotiation is successful
between server and clients.
WPS Configured: "yes" means WPS feature is
enabled and goes into effect. "not used" means it is
not used. Usually the AP-security has been enabled,
here will displayed "not used".
WPS SSID: Show the main SSID set by WPS.
WPS Auth. Mode: The authorization mode
deployed by WPS, generally WPA/WPA2-personal
mode.
34