Chapter 2: Getting to Know the Wireless-N Broadband Router
The Rear Panel
Here is the description of the back panel. The RJ-45 ports for cable connection and Reset button are
located on the back panel as shown below.
Connections:
Rear Panel Interface
1-4 (LAN Ports)
RESET/WPS
WAN
POWER
Description
Connect to Ethernet devices (such as computers, switches,
hubs).
Note: After pressing the RESET button for 7 seconds, the
configurations you have set will be deleted and the device will
restore to the factory default settings. If you press this button
for 1 second, the WPS (PBC) function is enabled.
Connect to DSL Modem, Cable Modem or community
broadband
Receptor for the supplied power adapter.
Wireless-N Broadband Router
2