Samsung S27C390EAE User Manual page 29

2nd 3rd
PC/AV Mode
DisplayPort Ver.
Auto Source Switch
Key Repeat Time
Power LED On
Setup Custom Key
Description
Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
― Products with a display area of 16:9 or 16:10 are only supported.
Select the DisplayPort version to use.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― This option is available when the input source is set to DisplayPort.
When there is no signal, the display automatically switches to the newly connected device.
― This function may not be supported depending on the model or geographical area.
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec or 2 sec can be selected. If
Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.
Set the custom key so that your chosen function can be set up directly.
No Repeat is selected, a command responds only once when a button is pressed.
29