Samsung S22C450D User Manual
Samsung S22C450D User Manual

Samsung S22C450D User Manual

Hide thumbs Also See for S22C450D:
Table of Contents

Advertisement

User manual

S22C450D
S23C450D
S24C450D
S24C450DL
S27C450D
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00294D-00

Advertisement

Table of Contents
loading

Summary of Contents for Samsung S22C450D

  • Page 1: User Manual

    User manual S22C450D S23C450D S24C450D S24C450DL S27C450D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00294D-00...
  • Page 2: Table Of Contents

    Table Of Contents BEFORE USING Copyright Icons used in this manual THE PRODUCT Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Symbols Electricity and Safety Installation and Safety Operation and Safety Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging...
  • Page 3 SCREEN SETUP Brightness Configuring Brightness Contrast Configuring Contrast Sharpness Configuring Sharpness SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright SAMSUNG MAGIC Angle Configuring SAMSUNG MAGIC Angle Image Size Changing the Image Size H-Position & V-Position Configuring H-Position & V-Position Coarse Adjusting Coarse...
  • Page 4 Table Of Contents Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma RESIZING OR Language Changing the Language RELOCATING THE Menu H-Position & Menu V-Position SCREEN Configuring Menu H-Position & Menu V- Position Display Time Configuring Display Time Transparency Changing Transparency SETUP AND...
  • Page 5 MultiScreen Installing the Software Removing the Software MagicRotation Installing the Software Removing the Software TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the following. Q & A SPECIFICATIONS General PowerSaver...
  • Page 6 Table Of Contents Standard Signal Mode Table APPENDIX Contact SAMSUNG WORLD WIDE Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Correct Disposal Correct Disposal of This Product (Waste Electrical &...
  • Page 7: Before Using The Product

    © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
  • Page 8: Cleaning

    Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.
  • Page 9: Securing The Installation Space

    3.93 inches inches (10 cm) (10 cm) 3.93 inches(10 cm) Precautions for storage Be sure to contact Samsung Customer Service Center (page 88) if the inside of the monitor needs cleaning. (Service fee will be charged.) Before Using the Product...
  • Page 10: Safety Precautions

    Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.
  • Page 11: Electricity And Safety

    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
  • Page 12: Installation And Safety

    The product may become damaged by an electric shock.  Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result.  Keep the power socket where the power cord is connected unobstructed.
  • Page 13 Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury.  Using the product in an area with excess vibration may damage the product ...
  • Page 14: Operation And Safety

    Be sure to consult Samsung Customer Service Center (page 88) before  installation if you want to install the product at such a place.
  • Page 15 (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the  product, remove the power cord, and contact Samsung Customer Service Center (page 88). Product failure, an electric shock or fire may result.
  • Page 16 Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, ...
  • Page 17 Before Using the Product Exercise caution when adjusting the product angle or stand height. Otherwise, children's fingers or hands may become stuck and injured.  Tilting the product excessively may cause it to fall and result in personal  injury. Do not place heavy objects on the product.
  • Page 18: Correct Posture To Use The Product

    Before Using the Product Correct posture to use the product Use the product in the correct posture as follows. Straighten your back.  Allow a distance of 45 to 50cm between your eye and the screen, and look slightly  downward at the screen.
  • Page 19: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the styrofoam from the product. Check the components and remove the styrofoam and plastic bag. This image is for reference only.
  • Page 20: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing.  The appearance of the components and items sold separately may differ from the image shown.  Components Warranty card Quick setup guide User manual (Not available in some locations) Power cable...
  • Page 21: Parts

    Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide SAMSUNG MAGIC AUTO SAMSUNG MAGIC AUTO ANGLE ANGLE Icons Description Open or close the onscreen display (OSD) menu, or return to the ...
  • Page 22 Preparations Icons Description Use this button to control the brightness and contrast of the screen. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI/DisplayPort). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left...
  • Page 23: Reverse Side

    Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN RGB IN DVI IN POWER IN Port Ports Connect the power cord for your monitor to the POWER IN port on the back of the product.
  • Page 24: Installation

    Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or Do not remove the fixing pin until Insert the stand base into the cushion on a flat surface. Next, you are finished attaching the stand in the direction of the place the product with the face stand.
  • Page 25: Adjusting The Product Tilt And Height

    Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 21.5"-24" 27" 23"-27" 21.5" 0(±5mm) ~ 0(±5mm) ~ 100mm(±5mm) 130mm(±5mm) To adjust the height, remove the fixing pin.
  • Page 26: Installing A Wall-Mount Kit Or Desktop Stand

    Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or Unfasten the screw from the Lift and detach the stand. cushion on a flat surface. Next, back of the product.
  • Page 27: Anti-Theft Lock

    Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force. Samsung shall not be held liable for any product damage or personal injury caused by using a wall- ...
  • Page 28: Connecting And Using A Source Device

    Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.  The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. ...
  • Page 29: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting to a PC Select a connection method suitable for your PC.  Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analog Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
  • Page 30 Connecting and Using a Source Device Connection Using an DP Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN DP IN Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC. Press [ ] to change the input source to DisplayPort.
  • Page 31: Driver Installation

    An installation driver is contained on the CD supplied with the product.  If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and  download the file. Insert the user manual CD provided with the product into the CD-ROM drive.
  • Page 32: Setting Optimum Resolution

    Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** **Hz...
  • Page 33: Changing The Resolution Using A Pc

    Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture  quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. ...
  • Page 34 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. *********** *********** 2 Connecting and Using a Source Device...
  • Page 35 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
  • Page 36 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
  • Page 37: Screen Setup

    Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when Bright is set to Dynamic Contrast mode.
  • Page 38: Contrast

    Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This menu is not available when Bright is in Cinema Dynamic Contrast mode.
  • Page 39: Sharpness

    Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This menu is not available when Bright is in Cinema Dynamic Contrast mode. MAGIC 3.3.1 Configuring Sharpness MENU Press any button on the front of the product to display the Key Guide.
  • Page 40  MAGIC You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 41: Samsung Magic Bright

    Dynamic Contrast mode. MAGIC You can customize the angle to suit your preferences. 3.5.1 Configuring SAMSUNG MAGIC Angle MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 42: Image Size

    Image Size and press [ ] on the product. The following screen will appear. PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Custom SAMSUNG MAGIC Angle Image Size H-Position AUTO Auto: Display the picture according to the aspect ratio of the input source.
  • Page 43 Screen Setup Press [ ] to move to the option you want and press [ The selected option will be applied. 3 Screen Setup...
  • Page 44: Configuring H-Position & V-Position

    ] to move to H-Position or V-Position, and press [ ]. The following screen will appear. PICTURE PICTURE Brightness V-Position Contrast Coarse Sharpness Fine SAMSUNG MAGIC Bright Custom SAMSUNG MAGIC Angle Image Size Auto H-Position AUTO AUTO Press [ ] to configure H-Position or V-Position.
  • Page 45: Coarse

    Screen Setup Coarse Adjust the screen frequency. This menu is available in Analog mode only. 3.8.1 Adjusting Coarse MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to PICTURE...
  • Page 46: Fine

    Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. 3.9.1 Adjusting Fine MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 47: Configuring Tint

    Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when Bright is set to Cinema MAGIC Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color.
  • Page 48: Green

    Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 49: Blue

    Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 50: Color Tone

    Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This menu is not available when Angle is enabled. MAGIC 4.4.1 Configuring the Color Tone Settings MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 51: Gamma

    Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This menu is not available when Angle is enabled. MAGIC 4.5.1 Configuring Gamma MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 52: Resizing Or Relocating The Screen

    Resizing or Relocating the Screen Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display.  It will not be applied to other functions on your PC.  5.1.1 Changing the Language MENU Press any button on the front of the product to display the Key Guide.
  • Page 53: Menu H-Position & Menu V-Position

    Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 54: Display Time

    Resizing or Relocating the Screen Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time MENU Press any button on the front of the product to display the Key Guide.
  • Page 55: Transparency

    Resizing or Relocating the Screen Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to MENU SETTINGS...
  • Page 56: Setup And Reset

    Setup and Reset Reset Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset) MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 57: Eco Saving

    Setup and Reset Eco Saving Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when Bright is in Dynamic Contrast mode. MAGIC 6.2.1 Configuring Eco Saving MENU Press any button on the front of the product to display the Key Guide.
  • Page 58: Off Timer

    Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET...
  • Page 59: Turn Off After

    Setup and Reset Turn Off After The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is available only when Off Timer is set to On.
  • Page 60: Pc/Av Mode

    Setup and Reset PC/AV Mode PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode.  Supplied for the wide models only such as 16:9 or 16:10. ...
  • Page 61: Key Repeat Time

    Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.6.1 Configuring Key Repeat Time MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen.
  • Page 62: Source Detection

    Setup and Reset Source Detection You can activate Source Detection. 6.7.1 Configuring Source Detection MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [...
  • Page 63: Customized Key

    [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. The following screen will appear. SETUP&RESET SAMSUNG MAGIC Angle Customized Key SAMSUNG MAGIC Bright Eco Saving Image Size AUTO SAMSUNG...
  • Page 64: Information

    INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION MENU Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to INFORMATION.
  • Page 65: Configuring Brightness And Contrast In The Initial Screen

    INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness Contrast setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). Press any button on the front of the product (when no menu screen is displayed) to display the Key guide.
  • Page 66: Installing The Software

    Installing the Software Magic Tune 8.1.1 What is MagicTune? MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
  • Page 67: Installing The Software

    Wait until a message box appears informing you that the software has been removed completely. For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, please visit our website(http://www.samsung.com/us/consumer/ learningresources/monitor/magetune/pop_intro.html). 8 Installing the Software...
  • Page 68: Multiscreen

    Installing the Software MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software Insert the installation CD into the [CD-ROM drive]. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen"...
  • Page 69: Removing The Software

    Installing the Software 8.2.2 Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select "MultiScreen" from the program list and click the [Add/Delete] button. 8 Installing the Software...
  • Page 70: Magicrotation

    Installing the Software MagicRotation The MagicRotation Software from Samsung Electronics, Inc. provides the user with a rotation feature (0, 90, 180, 270 orientation) that facilitates the optimum utilization of computer display screen, better viewing and improved user productivity. 8.3.1 Installing the Software Insert the installation CD into the [CD-ROM drive].
  • Page 71 It is recommended that your System has the latest Service Pack installed.  For Windows™ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with Active  Desktop component. For more information, refer to the website(http://www.samsung.com/us/consumer/  learningresources/monitor/magicrotation/pop_download.html). Windows™ is registered trademark of Microsoft Corporation,Inc. ...
  • Page 72: Removing The Software

    Wait until a message box appears informing you that the software has been removed completely. For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicRotation, please visit our website(http://www.samsung.com/us/consumer/learningresources/ monitor/magicrotation/pop_download.html). 8 Installing the Software...
  • Page 73: Troubleshooting Guide 73 Requirements Before Contacting Samsung Customer Service Center

    Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 74 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 82).
  • Page 75 Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Go to Control Panel Appearance and  Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Display ...
  • Page 76 Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and  resolution? Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display  Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and ...
  • Page 77: Specifications

    Specifications 10.1 General Model Name S22C450D S23C450D S24C450D Size 21.5 Inches (54 cm) 23 Inches (58cm) 24 Inches (61 cm) 476.64 mm (H) x 509.76 mm (H) x 531.36 mm (H) x Display area Panel 268.11 mm (V) 286.74 mm (V) 298.89 mm (V)
  • Page 78 Specifications Model Name S22C450D S23C450D S24C450D 21.37 x 12.65 x 2.18 19.85 x 11.89 x 2.18 22.26 x 13.12 x Inches Inches 2.23 Inches Without Stand 504.3 x 301.9 x 55.45 542.9 x 321.4 x 565.4 x 333.2 x 55.45 mm 56.7 mm...
  • Page 79 Specifications Model Name S24C450DL S27C450D Size 23.6 Inches (59cm) 27 Inches (68cm) Display Panel 521.28 mm (H) x 293.22 mm (V) 597.60 mm (H) x 336.15 mm (V) area Pixel Pitch 0.2715 mm (H) x 0.2715 mm (V) 0.31125 mm (H) x 0.31125 mm (V) Horizontal 30 ~ 81 kHz Frequency...
  • Page 80 The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 10 Specifications...
  • Page 81: Powersaver

    (Power button) Consumption Power Indicator Blinking Power Consumption 24 watts 22 watts Typical 0.3 W Typical 0.3 W (S22C450D) Power Consumption 25 watts 28 watts Typical 0.3 W Typical 0.3 W (S23C450D) Power Consumption 30 watts 25 watts Typical 0.3 W...
  • Page 82: Standard Signal Mode Table

    If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. S22C450D Horizontal Vertical...
  • Page 83 Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080...
  • Page 84 Specifications S23C450D Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000...
  • Page 85 Specifications S24C450D Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000...
  • Page 86 Specifications S24C450DL Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000...
  • Page 87 Specifications S27C450D Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000...
  • Page 88: Appendix

    Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 89 (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix...
  • Page 90 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA 08008 SAMSUNG (08008 726 http://www.samsung.com 7864) TOLL FREE No. SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com Appendix...
  • Page 91 Appendix EUROPE SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com (GSM: 7799) KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com...
  • Page 92 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 93 Appendix MIDDlE EAST MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com...
  • Page 94: Responsibility For The Pay Service (Cost To Customers)

    .  use of supplies or separatly sold product unspecified by Samsung.  repair from a person besides an engineer of outsourcing service company or partner of Samsung  Electronics Co., Ltd. remodeling or repairing the product by customer.
  • Page 95: Correct Disposal

    Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
  • Page 96: Terminology

    Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
  • Page 97 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
  • Page 98 Key Repeat Time Checking the Contents Language Cleaning Coarse Color Tone MagicRotation Connecting and Using a PC MultiScreen Contact SAMSUNG WORLD WIDE Contrast Copyright Off Timer Correct Disposal Correct posture to use the product Customized Key Parts PC/AV Mode Display Time Q &...
  • Page 99 Index Safety Precautions SAMSUNG MAGIC Angle SAMSUNG MAGIC Bright Sharpness Source Detection Standard Signal Mode Table Transparency Turn Off After Index...

This manual is also suitable for:

S27c450dS24c450dlS23c450dS24c450dS24c450dw

Table of Contents