Nulaxy BR06 - WIRELESS RECEIVER Manual

Product Overview

Basic Parameters

Packing List

• 1 x Wireless Receiver
• 1 x Sticker
• 1 x User Manual

Product Functions

It wirelessly streams audio from your wireless-enabled media player to your wired speakers, headphones, car stereo, or home audio system, among other devices.

Pairing Method

1. Please connect the USB port to the power supply.
2. Please insert the AUX port into the AUX connector of the car or stereo. 3. Open your phone and search for the Bluetooth name (BT64), click Connect and use.

Notice:

1. Do not use the QC3.0 fast charging port to avoid excessive current and causing the product to enter a protective state.
2. If Bluetooth prompts for verification, please enter 0000 or 1234.
   

Common Operations

1. Music Functions
   
   
   Short press: previous song
   Long press: decrease volume
   
   Short press: play/pause
   
   Scroll up: Bass equalizer boost
   Scroll down: Bass equalizer reduced
   
   Short press: next song
   Long press: increase volume
2. Call Functions
   
   Short press: answer/hang up the call
3. Active Siri & Google
   
   Press twice:
   start Siri & Google
4. Lighting Functions
   
   Long press: turn on/off the light

When adjusting the volume, the light bar will change synchronously: The maximum volume is all on, the minimum volume is all off.
When adjusting the bass, the light bar will change synchronously:
Full light means maximum bass effect, full dark means no bass effect.

FAQs

Q1: The receiver cannot pair with my Bluetooth-enabled phone or MP3 player. What should I do?

A1:

1. Make sure the receiver is turned on and in pairing mode, indicated by the seven-color indicator light flashing in cycles.
2. Clear the pairing list on your Bluetooth device (phone, MP3 player, etc.) and repeat the pairing process.

Q2: Why is the sound too low when using the receiver?

A2:

1. Press and hold the next track button on the receiver to adjust the volume.
2. Make sure the playback channel on your mobile phone is enabled. Turn on your phone's Bluetooth function and click the icon on the right side of the connected earphones to activate the 'media channel' and 'call channel'.
3. Check your phone's "Settings" interface for any maximum volume limits.
4. The volume control on the receiver and the phone may operate independently due to different settings (e.g. Android). Adjust the volume settings on both the receiver and the phone if necessary.

Q3: Why do I experience stuttering, discontinuity, or electrical noise when using the receiver for music or calls?

A3:

1. Ensure that the receiver and the connected device are within a range of 10 meters to prevent signal disruption.
2. Strong environmental interference, such as large metal partitions or other sources, can disrupt the receiver's signal.
3. Maintain optimal signal and network conditions on your mobile phone to prevent potential interference or discontinuity during music playback or calls.
4. Inspect the audio cable and ports for any damage. If the damage is sound, properly insert the audio cable into its designated port or replace it with a new one.

Q4: Why doesn't the device turn on when plugged in?

A4:

1. Make sure to use an ordinary USB port for power supply, and use an unsuitable fast-charging USB port. When the power is high, incompatibility may occur, causing the product to fail to boot normally.

Safety Criteria

1. Please strictly adhere to the instructions and avoid disassembling or modifying the product for any reason, as it may lead to malfunction or damage.
2. Avoid submerging the product in any liquid or washing it with water. Exposure to water can cause damage to the device and compromise its functionality.
3. Ensure you use an adapter that complies with national or regional safety standards and uses the provided charging cable to charge the receiver. Using an incompatible charger can damage the battery or pose safety hazards.
4. It is important to use and store the product within normal temperature ranges. Avoid exposing it to temperatures below 0°C or above 45°C, as extreme temperatures can negatively impact the performance and lifespan of the device.
5. Do not block the openings of the receiver, such as the microphone port. Blocking these openings may interfere with normal function and may cause overheating.
6. Avoid using the product during thunderstorms or in adverse weather conditions. Doing so may result in abnormal performance or signal interruption, potentially compromising safety and functionality.

Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch
High Wycombe HP14 3FE UK
Email: info.cetservice@gmail.com
Phone: +447419325266