Aqara LED Bulb T1 - Turnable White Manual

Product Description

Aqara LED Bulb T1 (Tunable White) is a E27 smart light bulb that can adjust brightness and color temperature. Working with a hub, it can also realize remote control, timing control and smart automations.

*An Aqara Zigbee 3.0 hub is required. For more details, please visit: www.aqara.com/support.

Precautions

1. This product involves strong electricity during installation. Please install it according to the product instructions.
2. This product is only for indoor use. Please do not use it in the humid environment or outdoors.
3. Do not spill water or other liquid on this product.
4. Do not place this product near the heat source.
5. Do not install it in a closed and narrow bulb cover to avoid abnormal communication of devices.
6. Do not try to repair this product by yourself. Please contact the official after-sales personnel for any quality problem of the product.

Installation Instructions

Note:
Make sure the power switch is turned off before installation!
Install the bulb on the standard E27 bulb socket. Turn on the power switch after confirming the completion of the installation.

Quick Setup

1. Please follow the hub instructions to add the hub to the Aqara Home app.
2. Open the app and click "+" in the upper right corner of the home page to enter the page of adding devices (or accessories), where you can select Aqara LED Bulb T1 (Tunable White) and operate it according to the instructions on the app.

*If the device fails to be added, please move it close to the hub and try again.
Effective distance verification: Continue to turn on and off the lights for three times through the power switch. The hub gives out a voice prompt, indicating that the device can communicate effectively with the hub.

Restore to Factory Settings

If you need to restore the LED bulb to factory settings, you can continue to turn on and off the lights through the power switch for over 5 times (and each interval shall be within 2 seconds) until the bulb flashes twice slowly, which means that the device has successfully been restored to the factory settings.

Specifications

Model Number: LEDLBT1-L01
Product Dimensions: Ø60×115 mm
Wireless Protocol: Zigbee, Bluetooth
Rated Voltage: 220-240 V~
Rated Current: 42mA
Rated Frequency: 50/60 Hz
Rated Power: 8.5W
Luminous Flux: 806lm
Color Temperature: 2700K-6500K
Color Rendering Index: Ra90
Bulb Interface: E27
Power Factor: >0.85
Operating Temperature: 0°C to 40°C
Operating Humidity: 0% to 95% RH, no condensation

*This product complies with the exemption level requirements of IEC62471: 2006 photo-biological safety.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Lumi United Technology Co., Ltd is under license. Other trademarks and trade names are those of their respective owners Manufacturer: Lumi United Technology Co., Ltd. Address: Room 801-804, Building 1, Chongwen
Park, Nanshan iPark, No. 3370, Liuxian Avenue,

Fuguang Community, Taoyuan Residential
District, Nanshan District, Shenzhen, China
Online Customer Service: www.aqara.com/support
Email: support@aqara.com