Using Built-In Speedlight - Nikon N60 Instruction Manual

-continued
Using built-in Speedlight
1
Release the built-in Speedlight by pressing the
Speed light lock-release button, and set the flash
sync mode by rotating the Command Dial while
pressing
~
button.
• Speedlight starts to charge when it is released and
~
appears in the
viewfinder when Speedlight is fully charged .
•
~
(normal sync) disappears from the LCD panel when Normal Sync is set
and ~ button is released.
• Press down gently on the Speedlight to retract.
2 Set exposure mode and confirm shutter speed and
aperture.
60
Available shutter speed and aperture in each exposure mode
Exposure mode Available shutter speed
Available aperture
Page
General-Purpose Program
39
Auto-Multi Program Automatically set
---:w-
Vari-Program
Automatically set
~
-
Shutter -Priority Auto
1/125-30 sec:' 41
Aperture-Priority Auto Automatically set 42
-
Desired setting*2
1/125-30 sec:',
Manual
Long Time Exposure
43
*1 Shutter speed shifts automatically to 11125 sec. when the shutter speed is set to 11125
sec. or faster and the flash is fired (or attached optional Speedlight is turned on).
*2
Flash shooting distance range depends on the ISO film speed of film in use and aperture
selected. In Aperture-Priority Auto or Manual exposure mode, set the aperture according
to the flash shooting distance range table on page 58.