Using Built-In Speedlight - Nikon N60 Instruction Manual

8
8.1
28
Using Built-In Speedlight
If
~
(ready-light indication) blinks
in the viewfinder when you
lightly press the shutter release
button , use the bu ilt- in
Speedlight.
Press the Speed light lock-release button to release
the Speed light.
• As soon as the Speedlight is released it starts recharging , and when the
Speedlight is ready to fire
'I
appears without blinking in the viewfinder
(when the camera's meter is on).
• To close the Speedlight, press gently until it clicks shut.
(To
conserve
power, keep the Speedlight closed when it is not in use.)
Matrix Balanced Fill-Flash
Matrix Balanced Fill-Flash enables proper evaluation of exposure for the
main subject and background, and ensures adequate flash output. (For
details, see page 58.)
NOTE: Continuous use of built-in Speedlight
After continuous use of the built-in Speedlight, it may stop firing to
protect the firing tube. Wait for a while before using the Speed light
again .