Table of Contents
Advertisement
Radio and Bluetooth
Tuning the Radio
1. Press the Source button repeatedly to enter FM Radio Mode, indicated by a green light.
2. Press the Scan button on the remote.
3. The bar speaker will scan for all available stations, and store them.
4. Press the Channel +/- buttons to browse through stored stations.
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the BT button on the remote to switch to Bluetooth Mode., indicated by a blue light.
3. Press the Pair button on the side of the unit.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the ITB382 in your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will
5.
display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.
Playing Audio Wirelessly
1. After pairing to a bluetooth device, use the native controls on the connected Bluetooth Device to
select a track.
2. Play, pause or skip a selected track using the native controls on the connected Bluetooth Device.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.
10
Advertisement
Table of Contents
