Table of Contents
Advertisement
-ACCESSORIES-continued------------
TTL Multi·Flash Sync Cords SC·18 and SC·19
The SC-18 and/or SC-19 are used to connect the flash
units together for TTL multiple flash ope
ration.
The SC-
18 is 1.5m long
,
while the SC-19 is
3m.
TTL Multi·Flash Adaptor AS·10
When you plan to perform TTL multiple flash operation
with more than three flash units or to use the S8-15 or
S8-18 as a slave flash
unit,
the AS-10 is required. With
one AS-10 having three TTL multiple flash terminals
,
you
can use up to three slave flash units including one
mounted on it.
A tripod socket at the bottom enables the S8-168
mounted on the AS-10 to be fi xed to a tripod
.
To per-
form TTL flash photography with two units using the S8-
168 as a slave flash unit or to perform TTL photography
with three units using the S8-168 as a master flash unit
mounted on the
SC-1?,
use of the AS-10 is not always
needed.
Without the AS-10
,
however, the electrical con-
tacts on the flash unit are uncovered
and can be the cause of incorrect
output control.
64
Flash Tripod Adaptor AS·11
The AS-11 enables the S8-16A. used as a slave flash
unit,
to be attached to a tripod
.
Also
,
it
preven ts
the
S8-
16A ready-light from blinking for no reason and
lets
you
see when the flash is ready to fire
and whether or not the flash fired
at its maximum output.
Flash Unit Couplers AS·1, 4, 5,
6,
and 7
The AS-1
,
AS-4, or AS-? convert the accessory shoe of a
Nikon F2
-
or F3-series camera to the standard ISO-type
accessory
shoe,
allowing direct attachment of the S8-
168.
The AS-1 is for the F2-series camera and the AS-4
and? are for the F3 -series camera. A special feature of
the AS-? is that it lets you change film without removing
the flash
unit.
The
AS-6,
on the other
hand,
is used when you want to
mount the
S8
-16A directly on the Nikon
FA,
FE2,
FM2,
FE, F-501/N2020, F-301/N2000, FG,
FG-20,
EM or
FM
camera.
To
mount the
S8-16A
on an F2-series camera,
the AS-5 is required
.
Hide quick links:
Advertisement
Table of Contents
