Table of Contents
Advertisement
-PHOTOGRAPHIC TECHNIQUES-confinued-----
Manual multiple flash photography
If the secondary flash unit
is
either a Nikon Speedlight
S8-11,
S8-12, S8-14,
S8-15, S8-16 or
S8-17,
use
either
the SC-11
(approx.
25cm)
or SC-15
(approx.
1 m) sync
cord to connect the flash units together via
sync/multiple
flash terminal. With the S8-7E or S8-10, use the SC-5
(approx.
15cm), SC-7 (approx. 25cm) or SC-6
(approx.
1 m). All these
sync
cords are available as optional ac-
cessories
.
Note:
In manual
multiple
flash
operation,
make sure
to use
both
flash
units
on
manual.
In the TTL or
non·
TTL automatic
shooting
mode.
the
correct exposure cannot be
obtained.
because light from each speedlight
affects the
measurement.
62
Caution:
The S8·16 employs
a
speciallow·voltage triggering circuit
to
prevent electrical shock and damage to the hot·shoe
contact.
We do
not
recommend mixing Nikon Speedlights with flash units of other makers for
multiple flash photography,
unless you use slave units
for remote
trigger·
ing. Otherwise.
incorrect operation and/or
damage to
the
unit
may result.
Hide quick links:
Advertisement
Table of Contents
