Hisense H310BIT User's Operation Manual page 12

6.Place the lower door on a smooth
surface with its panel upwards.
Loose screws ②, detach the part
①
Then install part
position on left side together with
screws ②.
7.Change screw hole covers on
middle cover plate from left to right
(as shown in figure below).
8.Lay the refrigerator on soft foam
packaging or similar material.
Remove the adjustable bottom feet
part②, then remove the lower hinge
part① by unscrewing the self-
tapping screws③.
9. Unscrew the bottom hinge axis
①
.
to corresponding
Hisense Refrigerator
and remove it to the hole which is
side by side and screw it.
10. Replace the lower hinge part to
the left side and fixing it with the
special flange screws. Replace the
adjustable bottom feet part to
another side and fixing it.
11. Move the lower door and adjust
its position to align lower hole site
and upper hinge axis. Turn the middle
hinge by 180°, change the washer
on the axis to the upper side, adjust
the middle hinge to the appropriate
position and then install it.
12.Screw out The upper hinge axis,
turn the upper hinge over and fix axis
on it. Then place it at side for use.
13. Transfer the upper door to the
appropriate position. Secure the
door's level, make the middle hinge
axis into the lower hole of upper
door.
12