Table of Contents
Advertisement
Detaching the arm/stand (for VESA wall mount)
2.2
The detachable stand of this monitor is specially designed for wall
mount.
To detach the arm/stand
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use a screwdriver to remove the two screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
Figure 1
•
The wall mount kit ( 100x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VP327Q Series
Figure 2
2-2
Advertisement
Table of Contents
