Table of Contents
Advertisement
Quick Links
MODEL: JU506
Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
© Aug 2015
CY
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
E-mail: sales@bvahydraulics.com
Aluminum
Single Acting Cylinders
50 Ton Capacity
*
Fax: 816-448-2142
Website: www.bvahydraulics.com
JU506-M0_082015
Printed in Taiwan
Advertisement
Table of Contents
Related Manuals for BVA Hydraulics JU506
Summary of Contents for BVA Hydraulics JU506
- Page 1 JU506-M0_082015 Aluminum Single Acting Cylinders MODEL: JU506 50 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
- Page 2 2. Verify that the product and the application are compatible. If in center. Owners and operators of this equipment shall be aware doubt, call call BVA Hydraulics Technical Service (888) 332- that the use and subsequent repair of this equipment may require 6419.
- Page 3 WARNING Failure to comply with the following warnings may Do not pull, position or move cylinder setup by the result in personal injury as well as property hose. Use carrying handle or other means of safe damage. transport. • Study, understand, and follow all instructions Do not handle pressurized hoses.
- Page 4 Height (in) Area (lbs) Dia. (tons) Capacity (in) (in) (in) (psi) JU506 5.91 10.99 10,000 64.88 11.63 17.54 27.6 5.12 OPERATION of tape is used and it is applied carefully (two threads back) to Operate the hydraulic pump to advance and retract the cylinder.
- Page 5 MAINTENANCE (cont.) NOTICE: Do not attempt to grasp with pliers or wrench without first wrapping the jaws of such tool with rags or similar padding. How to bleed air from system: 1. Place pump at a higher elevation than the hose and cylinder as shown in Figure 2. 2. Operate pump to fully extend and retract the cylinder 2 or 3 times. The objective is to force the air bubbles up hill and back to the pump reservoir.
- Page 6 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 7 Aluminum Single Acting Cylinders MODEL: JU506 50 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com...
- Page 8 Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.
Need help?
Do you have a question about the JU506 and is the answer not in the manual?
Questions and answers