DeWalt DCF620NT Manual page 32

EngLIsh
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCF620 operates on an 18 volt XR Li-ion battery pack.
These battery packs may be used:DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.
Package Contents
The package contains:
1 Cordless drywall screwdriver
2 Battery packs
1 Battery charger
1 TSTAK compatible kitbox
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
30
WALT batteries with a
e
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Depth locator
1
Screw depth adjustment
2
collar
Locking collar
3
Nose cone
4
Battery release button
5
Battery pack
6
Collated Magazine attachment DCF6201 (Fig. E)
(available separately)
Screw guide
12
Screw length adjustment
13
Fine depth adjustment
14
Advancing mechanism
15
Shoe
16
Intended Use
Your drywall screwdriver has been designed for driving
drywall fasteners through drywall board into timber or metal
framing studs.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This drywall screwdriver is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Dead Spindle Drive Clutch
This screwdriver is equipped with a dead spindle feature; the
spindle does not turn until the fastener is pressed into the
workpiece. This enables fasteners to be placed onto the drive
accessory of a running screwdriver.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Trigger switch
7
Forward/reverse control
8
lever
Lock-on button
9
LED worklight
10
Belt hook
11
Advancing mechanism
17
release button
Release Buttons
18
Collated attachment
19
screwdriver bit